Where to Find a Concrete Contractor Near Me and Why You Need One

Concrete is a structural material made of a hard and chemically immobile particulate substance which is known as aggregate and is bonded together with water and cement.

Ancient Babylonians often used clay as a binding substance. On the other side, Egyptians made a substance that was more effective and similar to modern concrete by using gypsum and limestone as binders.

In 1824 Joseph Aspdin an English inventor grounded together with a mixture of clay and limestone. This mixture got the name and it was called portland cement and it remained the dominant cementing method that was used in concrete production.

concrete contractor near me

The Mixture

When we talk about aggregates they are usually designed as fine or coarse. If you decide to use them those materials need to be free from admixture with soft particles and clean. This requirement is because even small quantities of organic soil can make a chemical reaction that can seriously have an impact on strength of the concrete.

Concrete is normally characterized by the methods that are used to produce it and the type of cement or aggregate that is being used. The sturdiness, quality, and character of the concrete are determined by a water-to-cement ratio. A lower amount of water with everything else being equal will produce stronger concrete.

The combination should have enough water to make sure that every aggregate particle is totally surrounded by the cement paste, that the areas between the aggregate are filled, and that the concrete is liquid enough to be poured and spread successfully. Another sturdiness factor is the quantity of cement in relation to the mixture. For the places where really strong concrete is required there should be relatively less aggregate added.

Concrete strength

The standard way of measuring the strength of concrete is made in pounds per square inch or kilograms per square centimeter of force that is needed to crush a sample of a given hardness and age.

You should know that environmental factors like moisture and temperature are really affecting the concretes strength. The concrete can experience unequal tensile stresses that in the particular hardened states cannot be resisted and this is happening if you allow the concrete to dry prematurely. In the concrete restoration or curing process, the concrete is kept wet for some time after pouring in order to slow down the shrinkage that may occur while it hardens.

Another factor that can affect the concrete strength is the low temperatures and to compensate for this, the contractors are applying additives such as calcium chloride to the cement mix.

This will be able to accelerate the whole setting process and will generate heat that is sufficient to counteract low temperatures and avoid concrete restoration that can be needed later. An interesting fact is that large concrete forms that can’t be covered are not poured in very low or freezing temperatures.

Concrete contractors and their work

The most used material that is used in construction to build floors, roads, retaining walls, pool decks, and more is concrete. Concrete material as we already said serves us for many different things but mostly as the foundation of the buildings that we use to live in, play, and work and it is used for other residential and commercial needs.

In case the foundation of a concrete structure is not built with quality work and by the standards, it can become disastrous and will additionally cost you a lot.

Mostly because of this reason it is critical for the concrete contracting to have good and experienced employees that will be able to make a proper foundation. When employees are paid enough and the whole team is treated well you can be sure they will become far more motivated and invested in the success of their company, which additionally means they will become more productive on the job site.

Good and satisfied employees that put great performance while working will be able to acquire more jobs and projects for the concrete contractor. At first, this may seem like a huge cost for your company but it will actually become a great investment after some time. The formula is very simple: Satisfied employees –> Satisfied customers –> Satisfied employer –> More jobs and projects.

The role of concrete contractors

In many different projects like home construction and especially in big commercial construction projects, the schedule is something crucial that will drive the whole project forward.

When you deal with concrete contractors it is very important to allow them enough lag time in order to put up the different stages of site preparations, concrete forming, material placing, and lastly finishing. It is not a simple process and you will need to give time to contractors so they can do their job professionally.

Site preparation

Some of the general contractors are able to carry out their own site preparation which includes backfill and excavation. Shrubs and rocks are entirely eliminated. The ground is getting leveled, graded, and compacted in order to make sure that it can fully support the load necessities of the particular building that will be exposed to extreme weather conditions for many years to come.

If the ground isn’t properly prepared to allow for the settling of moisture and dirt that is something that can cause the concrete to buckle and can put in danger to the whole structural integrity.

Formwork and Shuttering

The greatest and best thing about concrete is its capability to be poured and shaped into any form that the homeowner’s design specifies which brings great pleasure. This can be achieved through formwork where the employees will create a mold where the concrete placing is happening and concrete is poured and placed and that mold is going to hold the concrete in place until the whole mixture hardens.

All requested forms can be made permanent or temporary and can be made in combination with plastic, metal, or wood depending on how the concrete work will be utilized. There have been great strides in formwork, and that is prefabrication that is allowing for formwork to be less expensive, less wasteful, and less labor-intensive.

The Placement

The most existing time is when the wet concrete gets poured into the forms after all the preparation and site work is done. The contractor workers will be able to move the concrete mix through the forms using rakes and shovels.

The Finish

This process is very similar to the site preparations and once the concrete is poured into the molds it needs to be consolidated and compacted in order for workers and quality managers to ensure there are no air pockets left in the mix. Air pockets can jeopardize the whole project and the integrity of the construction, because of that reason this step is necessary and crucial.

If it’s requested the finishing project will also include adding different decorative elements to the concrete mix such as design, dye, acid staining, or possibly detailed stamped concrete work.

Concrete contractors are Necessary to Get the Best Results

Always make sure that you understand everything and every process before starting a small project in your home. Our suggestion will be to always ask for professional help because they will be able to save you time, money, and probably some nerves.

If you are looking for professional help from local concrete companies in Kelowna British Columbia or areas that are near (west Kelowna, East Kelowna, etc) you should give us a call right away.

Concrete Contractors Kelowna is a business that specializes in concrete services in the Kelowna BC area and will be able to help you with all your concrete needs and project design in the most professional way.

We will be able to help you with the installation of different projects that you may have like Pool decks, basement floors, patios, foundations, driveways, new home construction, and many other services for our clients.

Leave a Reply

Your email address will not be published. Required fields are marked *